Tuesday, September 3, 2013

Basic NAT reminders

Below, there are some simple examples of NAT configurations on a Cisco router. 

STATIC NAT:



interface fa0/0
 ip address 10.1.1.2 255.255.255.0
 ip nat outside
!
interface fa0/1
 ip address 10.1.3.2 255.255.255.0
 ip nat inside
!
ip nat inside source static 10.1.3.1 10.1.1.10

R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
--- 10.1.1.10          10.1.3.1           ---                ---
host1#ping 10.1.1.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
icmp 10.1.1.10:5       10.1.3.1:5         10.1.1.1:5         10.1.1.1:5
--- 10.1.1.10          10.1.3.1           ---                ---

PAT:




interface fa0/0
 ip address 10.1.1.2 255.255.255.0
 ip nat inside
!
interface fa0/1
 ip address 10.1.3.2 255.255.255.0
 ip nat outside
!
ip access-list extended NET_INSIDE
 permit ip 10.1.1.0 0.0.0.255 any
!
ip nat inside source list NET_INSIDE interface fa0/1 overload
!


R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
icmp 10.1.3.2:6        10.1.1.1:6         10.1.3.1:6         10.1.3.1:6



NAT SRC & DST:



interface fa0/0
 ip address 10.1.1.2 255.255.255.0
 ip nat inside
!
interface fa0/1
 ip address 10.1.3.2 255.255.255.0
 ip nat outside
!
ip nat inside source static 10.1.1.1 10.1.3.10
ip nat outside source static 10.1.3.1 10.1.1.10
!
ip route 10.1.1.10 255.255.255.255 10.1.3.1
!

R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
--- ---                ---                10.1.1.10          10.1.3.1
--- 10.1.3.10          10.1.1.1           ---                ---

R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
--- ---                ---                10.1.1.10          10.1.3.1
icmp 10.1.3.10:10      10.1.1.1:10        10.1.1.10:10       10.1.3.1:10
icmp 10.1.3.10:18      10.1.1.1:18        10.1.1.10:18       10.1.3.1:18
--- 10.1.3.10          10.1.1.1           ---                ---



Dynamic NAT:



interface fa0/0
 ip address 10.1.1.2 255.255.255.0
 ip nat inside
!
interface fa0/1
 ip address 10.1.3.2 255.255.255.0
 ip nat outside
!
ip access-list extended NET_INSIDE
 permit ip 10.1.1.0 0.0.0.255 any
!
ip nat pool NAT_OUTSIDE 10.1.3.1 10.1.3.254 prefix-length 24 type match-host
!!!!!!!!!!!!!!!!!!!!!!
! Alternative:
!ip nat pool NAT_OUTSIDE 10.1.3.9 10.1.3.254 prefix-length 24 type rotary
!!!!!!!!!!!!!!!!!!!!!!!!
!
ip nat inside source list NET_INSIDE pool NAT_OUTSIDE

R3#show ip nat translations
Pro Inside global      Inside local       Outside local      Outside global
icmp 10.1.3.10:27      10.1.1.10:27       10.1.4.1:27        10.1.4.1:27
--- 10.1.3.10          10.1.1.10          ---                ---




Friday, August 16, 2013

Troubleshoot HIGH CPU during the night !

 
You will find below another EEM configuration. This script is useful in order to determine the root cause of an high CPU.
Some high CPU alerts can be generated during off hours. Obviously, nobody is working during the night in order to diagnose this alert! It's why I have created the script below.
If an high CPU syslog message ("%SYS-1-CPURISINGTHRESHOLD") is detected, the command "show proc cpu sorted 5min" is executed. The result of this command is then send to a mailbox.
 
process cpu threshold type total rising 80 interval 30
!
event manager applet ALERT-CPU
event syslog pattern "%SYS-1-CPURISINGTHRESHOLD"
 action 1.0 cli command "enable"
 action 2.0 cli command "show proc cpu sorted 5min"
 action 3.0 mail server "172.16.10.10" to "NetAdmin@mybox.com" from "myswitch@mylab.lab" subject "CPU Alert 5 min" body "$_cli_result"

Saturday, August 10, 2013

Cisco Prompt Modification


 

I have recently discovered a practice tips. As on UNIX you can easily modify you prompt on Cisco equipment. You have to use the prompt command with the following variables:
%h - hostname
%n - tty command counter number
%p - prompt character (> or #)
%s - Space

In the following example, I have modified the prompt in order to see on which line I'm connected.
With this variable, I can diretly see if another person is connected on the router:

Before:
RouterLAB #

Command:
#prompt %h%s-%s%n%p

After:
RouterLAB - 2#

Thursday, June 20, 2013

Detect High CPU on a Cisco Switch

Recently, I have had an issue on a Core Switch. This switch was running at 80% of CPU for 3 days. The CPU was not monitored and we have not received a syslog message on our server.
Also, I have decided to use the following command (on 4k5) in order to trigger a syslog alert in case of High CPU:

process cpu threshold type total rising 60 interval 20

This command trigger a syslog alert if the CPU exceeds 60 percent for a period of 20 seconds.

Saturday, June 8, 2013

EEM - Generate a customized syslog message



In order to generate a customized syslog message, you can use EEM (Embedded Event Manager). This is a Cisco tool. It helps to monitor events and generates an action when an particular event occur. In my case, I would like generate a customized Cisco log message if my primary WAN link is down. This message will have an 'alerts' level with my own description. By default, if an interface goes down it will only generate a 'informational' message. The policy of my syslog server is to generate an email only if I receive an 'error' level message.
I monitor interface giga1/1. If this this interface goes down (log message), I generate my customized message. You can see below the configuration:


event manager applet WanMonitor
 event syslog pattern "Interface GigabitEthernet1/1, changed state to administratively down"
 action 1.0 syslog priority alerts msg "PRIMARY WAN LINK is DOWN on Core 1"

Thursday, August 23, 2012

Giant frames on VSL link

I was checking the VSL link on a network and I have found a lot of giant:

show int Te1/5/5TenGigabitEthernet1/5/4 is up, line protocol is up (connected)
       8 runts, 1739095 giants, 0 throttles


I have searched on cisco.com and I have found the following:
The VSL carries data traffic and in-band control traffic between the two chassis. All frames forwarded over the VSL link are encapsulated with a special 32-byte header, which provides information for the VSS to forward the packet on the peer chassis. 

I guess if a packet close to1500 MTU is received and a 32-byte header is added, we have giant packet. If I'm wrong, don't hesitate to correct me.

Thursday, August 9, 2012

VPN connexion and Internet Access

When you are connected to a VPN session, normally you can access to the corporate LAN.
However, it's also possible to have access (in the same time) to Internet.

To do this on ASA, you have to configure some NAT rule.
All traffic that will go to Internet have to use the Internet facing interface like source IP address.

The configuration below is an example that can be applied:

ip local pool Pool_VPN 192.168.40.10-192.168.40.250 mask 255.255.255.0
!
interface GigabitEthernet0/1
 description Outside Facing Interface
 nameif INTERNET
 security-level 0
 ip address 199.199.199.199 255.255.255.240
!
object network NAT-VPN-POOL
 subnet 192.168.40.0 255.255.255.0
 description Pool VPN
!
object network NAT-VPN-POOL
 nat (any,INTERNET) dynamic interface

All traffic with VPN IP Pool source address and with Internet destination will match this NAT rule.
Source address will be modified with the outside interface.