Friday, February 5, 2016

Example - How to configure Site-to-site VPN with IOS router



  • Router 1 (Left):

crypto isakmp policy 10
 encr aes 256
 authentication pre-share
 group 5
crypto isakmp key CISCO address 10.10.20.3
!
!
crypto ipsec transform-set My-Set esp-aes 192 esp-sha-hmac
!
crypto map MyMap 10 ipsec-isakmp
 set peer 10.10.20.3
 set transform-set My-Set
 match address R1_TO_R3
!
interface FastEthernet0/0
 ip address 10.10.10.1 255.255.255.0
 crypto map MyMap
!
interface FastEthernet0/1
 ip address 172.16.1.1 255.255.255.0
!
router ospf 10
 router-id 1.1.1.1
 log-adjacency-changes
 network 0.0.0.0 255.255.255.255 area 0
!
ip access-list extended R1_TO_R3
 permit ip 172.16.1.0 0.0.0.255 172.16.3.0 0.0.0.255
  • Router 3 (Right):

crypto isakmp policy 10
 encr aes 256
 authentication pre-share
 group 5
crypto isakmp key CISCO address 10.10.10.1
!
!
crypto ipsec transform-set My-Set esp-aes 192 esp-sha-hmac
!
crypto map MyMap 10 ipsec-isakmp
 set peer 10.10.10.1
 set transform-set My-Set
 match address R3_TO_R1
!
interface FastEthernet0/0
 ip address 172.16.3.3 255.255.255.0
!
interface FastEthernet0/1
 ip address 10.10.20.3 255.255.255.0
 crypto map MyMap
!
router ospf 10
 router-id 3.3.3.3
 log-adjacency-changes
 network 0.0.0.0 255.255.255.255 area 0
!
ip access-list extended R3_TO_R1
 permit ip 172.16.3.0 0.0.0.255 172.16.1.0 0.0.0.255

  • Validation:


Router3#show  crypto ipsec sa

interface: FastEthernet0/1
    Crypto map tag: MyMap, local addr 10.10.20.3

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (172.16.3.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (172.16.1.0/255.255.255.0/0/0)
   current_peer 10.10.10.1 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 3242, #pkts encrypt: 3242, #pkts digest: 3242
    #pkts decaps: 3242, #pkts decrypt: 3242, #pkts verify: 3242
    #pkts compressed: 0, #pkts decompressed: 0


Router3#show  crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
10.10.10.1      10.10.20.3      QM_IDLE           1002    0 ACTIVE






No comments:

Post a Comment