Monday, March 9, 2015

Migrate from spanning-tree redundancy to LACP

Just a small memo of how migrate from spanning-tree redundancy to LACP with the minimum of outage.
If you follow these steps, you will normally not loose the control to your remote switch (or just during the spanning-tree convergence time).

Before the beginning of the migration, we have the following topology:

Start of the migration:

Access switch:
interface Gig 0/2
shut

Core switch:
int port-channel 10
shut
!
default interface Gi0/2
!
interface Gi0/2
channel-group 10 mode active
!
int po 10
switchport mode trunk
switchport trunk allowed vlan all



Core switch:
interface Gi0/2
shut

Access switch:
interface port-channel 1
!
default interface Gig 0/2
!
int Gig 0/2
channel-group 1 mode active
!
int po1
switchport mode trunk
switchport trunk allowed vlan all
no shut


Core switch:
interface port-channel 10
no shut




Access switch:
int Gig 0/1
shut

Core switch:
default int Gi0/1
!
int Gi0/1
switchport mode trunk
switchport trunk allowed vlan all
channel-group 10 mode active


Core switch:
int Gi0/1
shut

Access switch:
default int Gig 0/1
!
int Gig 0/1
switchport mode trunk
switchport trunk allowed vlan all
channel-group 1 mode active

Core switch:
int Gi0/1
no shut

No comments:

Post a Comment